All Fastener tension Design Excel Sheet Based On ACI 318-02

Description

SHEET NO-1:- Single Tension Fastener Away from Edges Based on ACI 318-02
SHEET NO-2 :- Group of Tension Fasteners Near an Edge with Eccentricity Based on ACI 318-02
SHEET NO-3 :- Single Fastener in Tension and Shear Near an Edge Based on ACI 318-02
SHEET NO-4 :- Group of Tension and Shear Fasteners Near Two Edges Based on ACI 318-02
SHEET NO-5 :- Column Base Fasteners Near Two Edges Based on ACI 318-02

Input Data & Design Summary
Concrete Strength
Specified Strength Of Fastener
(The Strength Of Most Fastenings Is Likely To Be Controlled By The Embedment Strength Rather
Than The Steel Strength, So It Is Usually Economical To Use ASTM A307 Grade A Fastener.)

• Factored Design Load
• Effective Embedment Depth
• Fastener Diameter
• Fastener Head Type
  ( 1=square, 2=heavy Square, 3=hex, 4=heavy Hex, 5=hardened Washers )

Analysis

• Effective Area Of Fastener
• Bearing Area Of Head
• Check Fastener Tensile Strength :
• Effective Area Of Fastener
• Bearing Area Of Head
• Check Fastener Tensile Strength :
• Check Pullout Strength :